| |
Labtech Engineering is the proud manufacturer of durable, precise and
innovative laboratory equipment for the plastics industry. Labtech
builds equipment to the highest quality standards and in strict
conformity to CE and all other world safety norms. Our products include
Two-Roll Mills, Rubber Mills, Hydraulic and Electric Presses, Single Screw and Twin
Screw extruders, Chill Roll Film and Sheet Casting Lines, Blown Film
Lines, Filter Test, Mixers, and more…
Under Swedish management, Labtech Engineering manufactures in
Bangkok, Thailand and is exporting to the Canadian, and United States market.
This 9 layer co-extrusion blown film line was designed for a customer in
the MidWest USA to allow the operator extra work space around the die,
and for a low ceiling height.
Mini Chill roll cast film line with
16mm extruder for maximum color dispersion.
150mm chill
roll width. |
|
Mini 5 layer co-extrusion line
|
|
|
|
|
 |
|
|
|
|
Video of 5 Layer Compact Blown Film Line with oscillating nip
rolls: https://www.youtube.com/watch?v=V9ebCaxTZ5Q&t=37s |
24:1 L/D, 12mm/8mm conical screw accepts 1.5mm X 1.5mm pellets, perfect
for Universities.
Click Here to see Video.
OUR
PRODUCT LINE - LABORATORY EQUIPMENT
 _____
130 meters/minute
with outstanding reel geometry, to be shown at the 2022 K Show
Totally new advanced design high speed winder with no "birds nests"
Click here to view video of previous line running!!!
_____________________________________________________________________________________________________________________________
|
Laboratory Blown Film Lines:
12.5mm, 20mm, 25mm, 30mm, 40mm, 45mm, 60mm, all 30:1 L/D extruders.
Blown film lines for film lay-flat widths of up to 550 mm.
Include features such as a twin-channel cooling ring, nip rolls,
variable speed haul-off, slitters and winder. Blown film
die sizes from 20mm to 120mm.
An optional oscillating nip roll is available for the LF-400
blown film line.
Co-extrusion lines for films with up to 9 layers. Large film
tower with twin pillars, modern design enclosure, pneumatic nip
rolls, infinitely variable-speed drive, high-capacity cooling
ring, film wind-up, and freestanding central control cabinet
incorporating all controls for the tower and extruders.
|
|
|
 |
|
|
Two
Station Surface Winders and Single or Two Station Constant
Tension Winders
The Constant Tension
Winders are equipped with bobbin free pneumatic expansion shafts
for easy roll removal. Tension for both rolls is
independently adjustable.
|
|
|
Hydraulic & Electric Laboratory Presses:
Hydraulic laboratory presses from 20 to 80 metric tons platen
pressure. A double set of heating and cooling platens are
standard. Available with a fully automatic platen insert cooling
system as well as many platen configurations and control
options.
An all new totally electric 20 ton press - Debuted at the 2012
NPE show in Orlando, Fl. |
|
|
Laboratory Filter Test:
Filter test with and without a gear pump for accurate quality
testing and standardization of masterbatches and compounds.
Standard filter sizes from 15 down to 5 microns. |
| |
|
Laboratory Single Screw Lab
Extruders:
Single screw laboratory extruders
with diameters of 12,5, 20, 25, 30, 40, 45, and 60mm all with an L/D ratio of 30:1. The 20 mm extruder is
available as a table top version. The 25mm and larger extruders are
available both in vented or non-vented versions with plain
screws or equipped with a Maddock mixing section, as well as a
pineapple mixer at the screw tip.
25mm Vented
Extruder
|
|
 |
Laboratory High Speed Lab Mixers:
25 and 75 liter pilot plant high-speed mixers with variable
impeller speed, automatic mixing cycles and optional
water-cooled impeller. |
| |
|
 N
All new design 26mm Twin Screw
Extruder
|
Laboratory Co-rotating Twin
Screw Extruders:
Modular co-rotating twin screw extruders have clam-shell barrels
and our unique super hard tool steel barrel inserts. Fully
closed barrels are an option. Machines are available with 12,
16, 20 and 26 mm screw diameters and L/D ratios from 32:1 to
48:1
These twin screw extruders can also be matched up with a gear
pump to our chill roll casting sections, and blown film sections
for development of Bio-polymers and other special film products.
A new 26mm COMBI Co and Counter rotating extruder to compound
PVC compounds also!!
 
|
Laboratory
High Speed Mixers:
Manual and computerized high-speed mixer with
optional Cooling mixer. Available in sizes from 5 to 75L,
Cooling mixers up to 50L. |
|
  
Pelletizing Systems:
Strand, (Air or Water
Bath), and Hot Cut air cooled Pelletizing for Laboratories and product
development, small run masterbatch production. Underwater
pelletizing systems. |
All New! Medical Lab Extruder, 12mm Twinscrew, Air Strand
Cooling, Micro Pelletizer |
 |
|
|
Laboratory Chill Roll Film and Sheet Casting Lines:
12.5mm, 20mm, 25mm, 30mm, 45mm, 60mm extruders, all 30:1 L/D.
Chill roll film and sheet casting lines are available both as
floor and bench top versions. Flat die widths range from 125 mm
for bench top versions up to 300 mm for floor versions. Dies
have adjustable lips for sheet thickness from 0.3 to 1.5 mm or
film thickness down to 0.01 mm. All three rolls are hard
chromed, mirror polished and cored for water cooling and
heating. Polishing roll is pneumatically operated.
Co-extrusion flat film and sheet lines for up to
9 layers.
Suitable for producing film and sheet with materials such as PE,
PP, PS, ABS, PVC, PET, PC, etc.
Laboratory MDO Units with winder:
Labtech MDO unit
shown with Co-ex Cast Film Extrusion line. A fully
integrated line with either blown film or cast film for product
development. MDO's are available from 350mm wide to 800mm
wide rolls.
NEW!! : 6 Ton Air Clamp
and servo screw Injection
Molding Machine
for Lab Color Sample Plaques, and automated lights out molding
of small parts. Excellent for Universities,
 |
|
|
|
Laboratory Bench Top High Speed Mixers:
Bench top 10, 5 and 1.5 liter mini high-speed mixers with
variable speed drive and easily removable mixing bowl.
|
A
small Tabletop One Ton molding machine for molding small parts
up to 5 grams
All
electric, servo motor drives
Runs on 220V single
phase
Only consumes 3 amps power
Simple inexpensive
molds, optional roll around cart
|
All new!
Microplast 1 ton molder with
bluetooth smart phone control. |
Laboratory Co-Ex Cast and Blown
Film Lines:
12.5mm, 20mm, 25mm, 30mm, 45mm, 60mm co-ex Blown and cast film lines
up to 9 layers.
Blown Film,
(3) 12.5mm
extruders, 3 layer co-ex line
shown in the upper photo. (5) 30mm extruders, oscillating
nip roll, gravimetric layer thickness control, shown in the
lower photo.
|
Single and Co-ex Blow
Molding solutions for your laboratory, and small production
jobs.
|
Laboratory Medical Tubing Lines
25 mm Extruder with 25/1 L/D & bimetallic
barrel and screw
Crosshead Die
10' Cooling Tank with 2' Vacuum Chamber
OD Monitor & Control System
Belt Puller
Traverse Winder |
|
|
|
|
|
Call (440) 812-0132
or (810) 516-1700 for Pricing
|
|
fault.asp.jpg)
